- LT-4301M DIO Model (Sink Output Type)
- PFXLM4301TADDK
- 5.7"
Documentation
Support
Quick Information
Design Tools
Software
Certifications
Functional Specifications
Display Type | TFT Color LCD
|
---|---|
Display Size | 5.7"
|
Resolution | 320 x 240 (QVGA)
|
Effective Display Area | 115.2 x 86.4 mm (4.53 x 3.40 in.)
|
Display Colors | 65,536 colors
|
Backlight | White LED
Non-exchangeable LED ON / OFF control, adjustable screen saver activation time |
Brightness Control | 16 levels of adjustment available via touch panel in the configuration menu
|
Language Fonts | Japanese, ASCII, Chinese (Simplified), Chinese (Traditional), Korean, Cyrillic, Thai*1
|
Character Sizes | 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts
|
Font Sizes | Width can be expanded 1 to 8 times. Height can be expanded 1/2 and 1 to 8 times.
|
8 x 16 dots | 40 characters per row x 15 rows
|
16 x 16 dots | 20 characters per row x 15 rows
|
32 x 32 dots | 10 characters per row x 7 rows
|
8 x 8 dots | 40 characters per row x 30 rows
|
Program Area | FLASH EPROM 132 KB (equivalent to 15,000 steps)*2
|
Variable Area | nvSRAM 64 KB
|
Application Memory | FLASH EPROM 16 MB
(includes screen editing program and extended logic program)*3 |
Data Backup | nvSRAM 128 KB
|
Touch Panel Type | Resistive Film (analog)
|
Touch Panel Service Life | 1 million touches or more
|
Serial (COM1) | RS-232C/RS485 x 1
RS-232C (Connector type: RJ45, Isolation: None, Maximum baud rate: 115,200 bps, Cable Type: Shielded, Cable Maximum length: 15 m (49 ft), 5 Vdc power supply for RS-232C: None) RS-485 (Connector type: RJ45, Isolation: None, Maximum baud rate: 115,200 bps, Cable Type: Shielded, Cable Maximum length: 200 m (656 ft), Polarization: Setting is required via software when connecting Multiple LTs. Refer to the "GP-Pro EX Device/ PLC Manual" for the setting. 5 Vdc power supply for RS-485: None) *4 |
Ethernet (LAN) | IEEE802.3 compliant Ethernet x 1
(Connector type: RJ45, Driver: 10 M half duplex (auto negotiation)/ 100 M full duplex (auto negotiation), Cable type: Shielded, Automatic cross-over detection: Yes) |
USB (TYPE-A) | USB 2.0 (Type A) x 1
(Power Supply Voltage: 5Vdc +/-5%, Maximum Current Supplied: 500mA, Maximum Transmission Distance: 5m (16.4 ft.)) |
USB (mini-B) | USB 2.0 (Mini-B) x 1
|
DIO (Sink Type) | 20 Points Standard Input (including 2 Points for Fast Input)
10 Points Standard Output, 2 Points for Fast Output |
1 Please refer to the GP-Pro EX Reference Manual for details on font types and character codes.
2 Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1 MB.
3 Capacity available for user application.
4 2-wire connection is available for RS-485. When a Device/PLC supports 2-wire connection, 4 wires (RXD+, TXD+, RXD-, and TXD-) can be short-circuited to be 2 wires (RXD+ and TXD+ = D1, RXD- and TXD- = D0). For details on the connection, refer to the connection manual.
General Specifications
Memory | Font area | FLASH EPROM 8 MB (when limit exceeded, uses application memory) |
---|
Standard compliance | IEC 61131-2 | |
---|---|---|
Storage altitude | 0 to 10,000 m (0 to 32,808 ft) | |
Operating altitude | 0 to 2,000 m (0 to 6,560 ft) | |
Degree of protection | IEC61131-2 | IP20 with protective covers in place |
Rediated radio frequency electromagnetic fields | IEC/EN 61000-4-3 | 10 V/m (80 MHz to 3 GHz) |
Surge immunity | IEC/EN 61000-4-5 | Power supply: CM: 1 kV; DM: 0.5 kV Digital I/O: CM: 1 kV; DM: 0.5 kV Shielded cable: 1 kV CM = line-earth DM = line-line |
Conducted disturbances induced by radio-frequency fields | IEC/EN 61000-4-6 | 10 Veff (0.15 to 80 MHz) |
Electric field strength | EN 55011 (IEC/CISPR11) | 30 to 230 MHz, quasi peak 10 m @40 dBμV/m |
230 MHz to 1 GHz, quasi peak 10 m @47 dBμV/m | ||
Vibration immunity (operating) | IEC 61131-2 | |
Protection (front module) | IP65f - (IEC 60529) | |
Protection (rear module) | IP 20 - (IEC 60529) | |
Shock immunity (operating) | IEC 61131-2 15 gn 11 msv |
Digital Inputs
Digital Input Characteristics
Rated Current | 5 mA | |
---|---|---|
Inrush Values | Voltage | 30 Vdc |
Current | 6.29 mA max. | |
Input impedance | 4.9 kΩ | |
Input type | Sink/Source | |
Rated voltage | 24 Vdc | |
Maximum Allowable Voltage | 28.8 Vdc | |
Input limit values | ON Voltage | 15 Vdc or more (15 to 28.8 Vdc) |
OFF Voltage | 5 Vdc or less (0 to 5 Vdc) | |
ON Current | 2.5 mA or more | |
OFF Current | 1.0 mA or less | |
Isolation | Method | Photocoupler Isolation |
Between internal logic | 500 Vdc | |
Filtering | 0.5 ms to 30.0 ms | |
IEC61131-2 edition 3 type | Type 1 | |
Compatibility | Supports 2 wire and 3 wire sensors | |
Cable type and length | Shielded: Maximum 100 m (328 ft) Non-shielded: 50 m (164 ft) |
|
Terminal blocks | Type: 3.5 mm (0.137 in.) pitch Terminal blocks are removable |
|
Input paralleling | No |
High Speed Counter Input Characteristics
Rated Current | Voltage | 24 Vdc | |
---|---|---|---|
Current | 7.83 mA | ||
Inrush values | Voltage | 30 Vdc | |
Current | 9.99 mA | ||
Input impedance | 3.2 kΩ | ||
Input type | Sink/Source | ||
Rated voltage | 24 Vdc | ||
Maximum Allowable Voltage | 28.8 Vdc | ||
Input limit values | ON Voltage | 15 Vdc or more | |
OFF Voltage | 5 Vdc or less | ||
ON Current | 5 mA or more | ||
OFF Current | 1.5 mA or less | ||
Isolation |
Method | Photo coupler Isolation | |
Between channels logic | 500 Vdc | ||
Filtering | None, 4 μs, 40 μs | ||
IEC61131-2 edition 3 type | Type 1 | ||
Compatibility | Supports 2 wire and 3 wire sensors | ||
Cable | Type | Shielded | |
Length | Maximum 10 m (33 ft) | ||
Terminal blocks | Type: 3.5 mm (0.137 in.) pitch Terminal blocks are removable |
||
Maximum frequency | · 100 kHz is the maximum frequency for Single-phase · 50 kHz is the maximum frequency for 2-phase · Duty Rate: 45 to 55% |
||
Phase Counting Mode | · Single phase · 2 Phase x2 · 2 Phase x4 · 2 Phase x2 Reverse · 2 Phase x4 Reverse |
||
Response time | Marker | 1 ms | |
Preload | 1 ms | ||
Prestrobet | 1 ms | ||
Synchronize output | 2 ms | ||
Min. Pulse Width(Pulse input) | Counter: |
Pulse Catch |
|
Input paralleling | No |
Digital Outputs
Transistor Output Characteristics
Rated Voltage | 24Vdc | |
---|---|---|
Output range | 19.2 to 28.8 Vdc | |
Output type | Sink | |
Rated current | 0.3 A/point, 3.0 A/common | |
Residual voltage | 1.5 Vdc or less for I= 0.1A | |
Delay |
Off to on (0.3 A load): 1.1ms |
|
Isolation | Method | Photocoupler Isolation |
Between internal logic | 500 Vdc | |
Minimum resistor load | 80 Ω at 24 Vdc | |
Cable length | Non-shielded: 150 m (492 ft) | |
Protection against short circuit | No | |
Terminal blocks |
Type: 3.5 mm (0.137 in.) pitch |
(1) When connecting as power surges
Caution: Q0 and Q1 circuits are push-pull circuits. The following is the operation of the push-pull circuit at the Sink Output and the Source Output. Sink Output: +24(V) is output to terminal Q0, Q1 when the logic for Q0, Q1 is off Source Output: 0(V) is output to terminal Q0, Q1 when the logic for Q0, Q1 is off Standard Output terminals Q2 or later are common open collector outputs. Do not connect Fast Output terminals Q0, Q1 and Standard Output terminals Q2 or later. It will short. If you add a manual circuit to terminal Q0, Q1, isolate the manual circuit and terminal Q0, Q1 with a relay. Without isolation, it will short. |
Pulse Output/PWM Output/High-speed Counter (Synchronize Output) Characteristics
Output type | Sink | ||
---|---|---|---|
Rated voltage | 24 Vdc | ||
Power supply input range | 19.2 to 28.8 Vdc | ||
Power supply reverse protection | Yes | ||
Pulse Output/PWM output current | 50 mA/point, 100 mA/common | ||
Response time for original input |
2 ms |
||
Isolation resistance | Between fast outputs and internal logic | 10 MΩ or more | |
Between power supply port and protective earth ground (PE) = 500 Vdc | 10 MΩ or more | ||
Residual voltage | for I = 0, 1 A | 1.5 Vdc or less | |
Delay | Off to on (50 mA load): 1.1ms On to off (50 mA load): 1.1ms NOTE: The delay is not including the cable delay. |
||
Minimum load impedance | 80 Ω | ||
Maximum Pulse output frequency | 50 KHz | ||
Maximum PWM output frequency |
65 kHz |
||
Accuracy Pulse Output/ PWM Output | Frequency | Accuracy | Duty |
10 to 1000 Hz | 1% | 1 to 99% | |
1.001 to 20 kHz | 5% | 5 to 95% | |
20.001 to 45 kHz | 10% | 10 to 90% | |
45.001 to 65 kHz | 15% | 15 to 85% | |
Duty rate range | 1 to 99% | ||
Cable | Type |
Shielded, including 24 Vdc power supply |
|
Length | Maximum 5 m (16 ft) | ||
Terminal blocks |
Type: 3.5 mm (0.137 in.) pitch |
Caution: Q0 and Q1 circuits are push-pull circuits. The following is the operation of the push-pull circuit at the Sink Output and the Source Output. Sink Output: +24(V) is output to terminal Q0, Q1 when the logic for Q0, Q1 is off Source Output: 0(V) is output to terminal Q0, Q1 when the logic for Q0, Q1 is off Standard Output terminals Q2 or later are common open collector outputs. Do not connect Fast Output terminals Q0, Q1 and Standard Output terminals Q2 or later. It will short. If you add a manual circuit to terminal Q0, Q1, isolate the manual circuit and terminal Q0, Q1 with a relay. Without isolation, it will short. |
Terminal Blocks
Pin Arrangement | Group | Pin | Signal Name | Group | Pin | Signal Name |
---|---|---|---|---|---|---|
Fast Output | A1 | V0+ | Fast Output | B1 | V0- | |
A2 | Q1 | B2 | Q0 | |||
Standard Output | A3 | V1+ | Standard Output | B3 | V1- | |
A4 | V1+ | B4 | V1- | |||
A5 | Q3 | B5 | Q2 | |||
A6 | Q5 | B6 | Q4 |
Pin Arrangement | Group | Pin | Signal Name | Group | Pin | Signal Name |
---|---|---|---|---|---|---|
Standard Output | C1 | Q7 | Standard Output | D1 | Q6 | |
C2 | Q9 | D2 | Q8 | |||
C3 | Q11 | D3 | Q10 | |||
Fast Input/Standard Input | C4 | I0 | Fast Input/Standard Input | D4 | IC0 | |
C5 | I1 | Standard Input | D5 | I2 | ||
Standard Input | C6 | I3 | D6 | IC1 | ||
C7 | I5 | D7 | I4 | |||
C8 | I7 | D8 | I6 | |||
C9 | I9 | D9 | I8 | |||
C10 | IC2 | D10 | IC2 | |||
C11 | I11 | D11 | I10 | |||
C12 | I13 | D12 | I12 | |||
C13 | I15 | D13 | I14 | |||
C14 | I17 | D14 | I16 | |||
C15 | I19 | D15 | I18 |
External Dimensions
Panel Cut-out
* If rotating torque acted on a display module is 2.5 N.m (22.12 in-lb) or more, use an anti-rotation tee which is supplied with a LT unit. The anti-rotation tee supports up to 6 N.m (53.10 in-lb). |