Specifications of PFXSP5700W (Display) / PFXSP5B41 (Box Module)

Manual | PFXSP700WCD Datasheet | PFXSP5B41 Datasheet | Technical Resources | Software | Certifications | SP5000 Flyer

Display Specifications

Display Type TFT Color LCD
Display Size* 15.6”
Resolution 1,366 x 768 pixels (FWXGA)
Auto Scaling Yes
Effective Display Area W344.2 x H193.5 mm
(W13.55 x H7.62 in.)
Display Colors 16 million colors
For details about Display Colors, refer to the manual for your screen editing software.
Backlight White LED
(Not user replaceable. When replacement is required, contact your local distributor.)
Backlight Service Life 50,000 hours or more (continuos operation at 25 °C [77 °F]
before backlight brightness decreases to 50%
Brightness Control 0...100 (Adjusted with touch panel or software)
Brightness Sensor Yes
Touch
Panel
Type Projected Capacitive (multi-touch, 5 points)
Resolution 2,048 x 2,048
Service Life 50 million times or more
*Supports BLUE Open Studio. Does not support GP-Pro EX or WinGP.
 

Electrical Specifications

Power
Supply
Rated Input Voltage 12...24 Vdc
Input Voltage Limits 10.8...28.8 Vdc
Voltage Drop 12 Vdc: 1.25 ms or less
24 Vdc: 5 ms or less
Power Consumption
(Primary Power Supply
[including power loss])
Max. 42 W with box module
In-Rush Current 30 A or less
Voltage Endurance 1,000 Vac, 20 mA for 1 minute (between charging and FG terminals)
Insulation Resistance 500 Vdc, 10 MΩ or more (between charging and FG terminals)

Environmental Specifications

International
Safety Standard
Physical
Environment
Surrounding
Air Temperature
0...60 °C (32...140 °F)
Storage Temperature -20...60 °C (-4...140 °F)
Surrounding Air and
Storage Humidity
10%...90% RH (Non condensing, wet bulb temperature
39 °C [102.2 °F] or less)
Dust 0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution Degree For use in Pollution Degree 2 environment
Corrosive Gases Free of corrosive gases
Atmospheric Pressure
(Operating Altitude)
800...1,114 hPa (2,000 m [6,561 ft] or lower)
Mechanical
Environment
Vibration
Resistance
IEC/EN 61131-2 compliant
5...9 Hz Single amplitude 3.5 mm (0.14 in.)
9...150 Hz Fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approx. 100 min.)
Shock Resistance IEC/EN 61131-2 compliant
147 m/s2, X, Y, Z directions for 3 times
Electrical
Environment
Noise Immunity Noise Voltage: 1,000 Vp-p
Pulse Duration: 1 μs
Rise Time: 1 ns
(via noise simulator)
Electrostatic
Discharge Immunity
Contact Discharge Method: 6 kV (IEC/EN 61000-4-2 Level 3)
NOTE: When using any of the options for this product, make sure to check the specifications for any special conditions or cautions that may apply to this product.

Memory

Application Memory Screen Size:  64MB *CFast card
Free Space:  About 7GB *1
Video Memory Up to 256 MB (UMA main memory)
L2 Cache Memory 1 MB

*1 You can install the applications you have used. As for hardware specifications, the CPU is Intel® AtomTM E3825 1.33 GHz (Dual core/Dual thread)  and the main memory is 'DDR3L SDRAM 2GB'. For the other hardware specifications, refer to "SP5000 Series Open Box Reference Manual".

 

Interface Specifications(Display)

USB (Type A)
Interface
Connector USB 2.0 (Type A) x 1
Power Supply Voltage 5 Vdc ±5%
Maximum Current
Supplied
500 mA
Maximum Transmission
Distance
5 m (16.4 ft)
USB (mini-B)
Interface
Connector USB 2.0 (mini-B) x 1
Maximum Transmission
Distance
5 m (16.4 ft)

Interface Specifications(Box Module)

Serial Interface COM1 Asynchronous Transmission RS-232C/422/485
Data Length 7 or 8 bits
Stop Bit 1 or 2 bits
Parity None, odd, or even
Data Transmission Speed 2,400(1,200)...115,200 bps
Connector D-Sub 9 pin (plug)
Serial Interface COM2 Asynchronous Transmission RS-232C/422/485
Data Length 7 or 8 bits
Stop Bit 1 or 2 bits
Parity None, odd, or even
Data Transmission Speed 2,400(1,200)...115,200 bps
Connector D-Sub 9 pin (plug)
USB (Type A) Interface Connector USB 2.0 (Type A) x 3
Power Supply Voltage 5 Vdc ±5%
Maximum Current Supplied 500 mA/port,
1 A total for 3 ports
Maximum Transmission Distance 5 m (16.4 ft)
USB (mini-B) Interface Connector USB 2.0 (mini-B) x 1
Maximum Transmission Distance 5 m (16.4 ft)
Ethernet Interface Standard IEEE802.3i/IEEE802.3u/IEEE802.3ab,
10BASE-T/100BASE-TX/1000BASE-T
Connector Modular jack (RJ-45) x 2
SD Card Interface SD Card SD Card Slot(Storage) x 1
CFast Card Interface CFast Card CFast Card Slot(System) x 1
CFast Card Slot(Storage) x 1
Expansion Unit Interface Expansion Unit Fieldbus Unit x 1
Video Interface DVI-D DVI-D OUT
Connector DVI-D 24 pin(socket) x 1
Sound Input Interface Sound Input MIC or LINE input(software switch)
Connector MINI-JACK ∅3.5 x 1
Sound Output Interface Speaker Output 300 mW (Rated Load: 8 Ω,
Frequency: 1 kHz)
LINE Output Rated load: 10 kΩ or more
Connector 2-piece terminal block (AUX) x 1
AUX Output Interface AUX Output Alarm Output/Buzzer Output
Rated Voltage 24 Vdc
Rated Current 50 mA or less
Connector 2-piece terminal block (AUX) x 1

Structural Specifications

Grounding Functional grounding: Grounding resistance of 100 Ω,2 mm2 (AWG 14) or thicker wire,
or your country’s applicable standard (same for FG and SG terminals).
Cooling Method Natural air circulation
Structure *2 When using a factory-installed front USB cover: IP65F, IP67F.
When using a front USB cover as an option: IP66F, IP67F, Type 4X (Indoor Use Only)/13
* The front face of this product when properly installed in an enclosure and
not using thefront panel USB port.
NOTE: The option is a front USB cover with screw manufactured by Pro-face
 (Model Number PFXZCDCVUS1).
External
Dimensions(Display)
W414 x H295 x D69 mm(W16.3 x H11.61 x D2.72 in.)
External
Dimensions(Box Module)
W188 x H131 x D45 mm(W7.4 x H5.16 x D1.77 in.)
Panel Cut
Dimensions
W396 x H277 mm(W15.591 x H10.91 in.) *3
Panel thickness area:1.6...5 mm (0.06...0.2 in.) *4
Weight *5 5.0 kg (11 lb) or less

*2 The front face of this product, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification.

*3 For dimensional tolerance, everything +1/-0 mm (+0.04/-0 in.) and R in angle are below R3 (R0.12 in.)

*4 Even if the installation wall thickness is within the recommended range for the “Panel Cut Dimensions”, depending on wall’s material, size, and installation location of this product and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.

*5 The weight for the combined unit of Box Module and Display Module equals the sum of the weight for the Modules. 

External Dimensions

 
 
SP-5B41
 
 

Panel Cut-out

Model Name A B C
SP-5700WC 396 mm (+1/-0 mm)
(15.59 in. [+0.04/-0 in.])
277 mm (+1/-0 mm)
(10.91 in. [+0.04/-0 in.])
1.6...5 mm
(0.06...0.2 in.)