* For host controllers and connection cables, refer to the corresponding device driver manual of your screen editing software.
"* *" is changed with the version of software.
| Product Name | Model No. | Description | Supported Model |
|---|---|---|---|
| 9-pin-to-25-pin RS-232C Conversion Cable (0.2 m) |
CA3-CBLCBT232-01 | Cable for converting a D-Sub 9-pin plug to a D-Sub 25-pin socket (RS-232C). |
Box Module |
| RS-422 9/25-pin Conversion Cable (0.2 m) |
PFXZCBCBCVR41 | Cable for converting a D-Sub 9-pin plug to a D-Sub 25-pin socket (RS-422). |
|
| COM Port Conversion Adapter | CA3-ADPCOM-01 | Connects optional RS-422 communication items to Serial Interface. |
|
| RS-422 Terminal Block Conversion Adapter |
PFXZCBADTM1 | Connects output from a Serial Interface (D-sub 9 pin plug) directly to an RS-422 terminal block. |
|
| RS-232C Isolation Unit | CA3-ISO232-01 | Connects a host controller to this product and provides isolation. (RS-232C and RS-422 are switchable). |
| Product Name | Model No. | Description | Supported Model |
|---|---|---|---|
| USB Transfer Cable (2 m) *1 | CA3-USBCB-01 | Downloads project data via USB Interface. | Box Module |
| USB Cable (5 m) | FP-US00 | Connects a USB printer (TYPE-B). | |
| USB Front Cable (1 m) | CA5-USBEXT-01 | Extension cable attaching USB interface to front panel. | |
| USB-Serial (RS-232C) Conversion Cable (0.5 m) |
CA6-USB232-01 | Cable for converting a USB interface into a serial interface (RS-232C). Allows connection to modems *2 or bar code readers *3 that support RS-232C. |
|
| USB/RS-422/485 Conversion Adapter |
PFXZCBCBCVUSR41 | Adapter for connecting this product (USB Type A) to an external device (RS-422/RS-485). |
|
| EZ Tower Light tube mounting fixing plate |
PFXZCETWHA1 | USB Connection Type Monolithic EZ Tower Light tube mounting with fixing plate. |
|
| EZ Tower Light with base mounting |
PFXZCETWW1 | USB Connection Type Monolithic EZ Tower with base mounting. |
|
| EZ Illuminated Switch | PFXZCCEUSG1 | A unit of 5 illuminated switches with multiple color LED connected to this product via USB. |
|
| EZ Numpad | PFXZCCEUKB1 | Numpad connected to this product via USB. |
| Product Name | Model No. | Description | Supported Model |
|---|---|---|---|
| USB Transfer Cable (USB Type A / mini-B) (1.8 m) *1 |
ZC9USCBMB1 | Cable for transferring screen data from a PC (USB Type A) to this product (USB mini-B). |
Box Module |
| USB Panelmount Extension Cable (USB mini-B) (1 m) |
ZC9USEXMB1 | Extension cable that attaches to the USB (mini-B) interface on the front side of the operation panel. |
|
| USB Clamp mini-B (1 port) | ZC9USCLMB1 | Clamp to prevent disconnection of USB cable (USB/mini-B, 1 port, 5 clamps/set). |
| Product Name | Model No. | Description | |
|---|---|---|---|
| GP-Pro EX | EX-ED-V** | HMI Screen editor & Logic Programming Software | |
| GP-Pro EX Ver. 3.0 or later *4 | EX-ED-V**-DVD | GP-Pro EX (DVD Version) | |
| Pro-Server EX V*.* Developer *6 | PFXEXSDVV** | Software that connects a PC to a GP via Ethernet and collects and transmits data |
|
| Pro-Server EX Developer License *7 | PFXEXSDLS | Pro-Server EX developer license | |
| Pro-Server EX Runtime License *8 | PFXEXSRLS | Pro-Server EX Runtime license | |
| MES Action License | PFXEXMSLSV** | License key permitting Pro-Server EX to access a database | |
| GP-Viewer EX | 1 licence | EX-VIEWER-LICENSE | License allowing a PC to access a SP5000 in remote mode. |
| 10 licences | EX-VIEWER-LICENSE-10 | ||
| 30 licences | EX-VIEWER-LICENSE-30 | ||
| Pro-face Remote HMI (iPhone, iPad, iPod touch) V*.* |
PFXEXRHIOSV** | Software to operate Pro-face HMI screen on iPhone, iPad and iPod touch |
|
| Pro-face Remote HMI (Android) V*.* |
PFXEXRHANDV** | Software to operate Pro-face HMI screen on Android OS |
|
| Pro-face Remote HMI Free (Android) V*.* |
PFXEXRHANDTRV** | Free software to operate Pro-face HMI screen on tablets or smartphones with Android OS |
|
| Pro-face Remote HMI Server | PFXEXRHSLS | Software to operate Windows programs via the Pro-face Remote HMI APP on any Android or iOS device, single license |
|
| Pro-face Connect | See our website for the details. | "Pro-face Connect" is a ready-to-use solution for Remote Access Over Internet on IPC, PS5000 Series and Smart Portal SP5000 Series without programming or configuring each device. |
|
| Product Name | Model No. | Description | Supported Model |
|
|---|---|---|---|---|
| 7.0-inch Wide Box Module Fixing Bracket | PFXZCHBMFBS1 | For SP5000X Series, Bracket for fixing Box module to Display module (1 piece) |
SP-5490WA | |
| 12.1-inch Wide & 15.6-inch Wide Box Module Fixing Bracket |
PFXZCHBMFBL1 | For SP5000X Series, Bracket for fixing Box module to Display module (1 piece) |
SP-5690WA SP-5790WA |
|
| DC Power Supply Connector with fixable screws |
CA7-ACCNL-01 | Connector to connect DC power supply cables (5 pcs/set) |
Display Module (except 7-inch Wide Display Module) |
|
| Fieldbus Unit Fixing Bracket * 2020 |
PFXZCHFUFB1 | For SP5000X Series/SP5000X Series, Bracket for fixing Fieldbus unit to Box module (1 piece) |
Box Module | |
| Auxiliary Output / Speaker Output Interface |
AUX Connector |
PFXZCDCNAUX1 | AUX connector required in case an external output is used (5 pcs/set). |
|
| Storage *9 | SD Memory Card (4GB) |
PFXZCBSD4GC41 | SD Memory Card (4GB, MLC, CLASS4) | |
| Replacement Battery *10 | PFXZCBBT1 | Primary battery for time data backup (1 piece) | ||
| Product Name | Model No. | Description | Supported Model |
|---|---|---|---|
| 7-inch Wide Installation Gasket | PFXZCDWG72 | Provides dust and moisture resistance when GP is installed into a solid panel (1 piece) |
7-inch Wide Display Module |
| 12-inch Wide Installation Gasket | PFXZCDWG122 | 12-inch Wide Display Module |
|
| 15-inch Wide Installation Gasket | PFXZCHWG154 | 15-inch Wide Display Module |
|
| DC Power Supply Connector (Straight type) |
PFXZCBCNDC1 | Connector to connect DC power supply cables (Straight type, 5pcs/set) |
SP-5490WA |
| DC Power Supply Connector with fixable screws (Angle type) |
PFXZCHCNDC3 | Connector with fixable screws to connect DC power supply cables (Angle type, 5pcs/set) |
SP-5690WA SP-5790WA |
| USB Clamp Type A (1 port) | PFXZCBCLUSA1 | Clamp to prevent disconnection of USB cable (USB/A, 1 port, 5 clamps/set) |
Box Module |
| SD Memory Card (1 GB) | PFXZCDSD1GC61 | SD Memory Card (1 GB, SLC, Class 6) for System Card |
Box Module |
| Product Name | Model No. | Description | Supported Model |
|---|---|---|---|
| J1939 Unit | PFXZCHEUJ1 | Expansion unit that enables participation in the J1939 communication network. |
Box Module |
| CANopen Master Unit | PFXZCHEUCAM1 | Expansion master unit to connect CANopen slave unit (bit input/output 1024 points / integer input/output 256 points) |
|
| DIO Connector for HTB * Maintenance Item |
CA7-HTBCNSET-01 | DIO Connector for HTB (13-pin connector for input and 16-pin connector for output, 1 pc each/set) |
CANopen Master Unit |
| 8-point Input Module | EXM-DDI8DT | 8-point sink-source shared type expansion unit | |
| 16-point Input Module | EXM-DDI16DT | 16-point sink-source shared type expansion unit | |
| 8-point transistor output module | EXM-DDO8UT | 8-point transistor output sink type expansion unit | |
| 16-point transistor output module | EXM-DDO16UK | 16-point transistor output sink type expansion unit | |
| 8-point transistor output module | EXM-DDO8TT | 8-point transistor output source type expansion unit | |
| 16-point transistor output module | EXM-DDO16TK | 16-point transistor output source type expansion unit | |
| 4-Point Input/ 4-Point Output Module |
EXM-DMM8DRT | 4-point input sink-source and 4-point relay output type expansion unit (1 common) mixed I/O unit |
|
| 2-ch Analog Input/ 1-ch Analog Output Module |
EXM-AMM3HT | 2-ch analog input / 1-ch analog output type expansion unit | |
| 4-ch Voltage, Current, Pt100/ Pt1000/Ni100/Ni1000 Input Module |
EXM-AMI4LT | 4-ch Voltage, Current, Temperature Expansion Unit | |
| MIL Connector (20 pin) for EX module * Maintenance Item |
CA6-EXMCNHE20P-01 | Connector for EX Module (5 pcs/set) | |
| FLEX NETWORK Master Unit *11 | PFXZCHEUFN1 | FLEX NETWORK Master Unit for SP5000 Series | Box Module |
| 32-point input Sink/Source and 32-point transistor output Sink type |
FN-XY32SKS41 | Input/output combination I/O unit of 32-point input sink/source and 32-point transistor output Sink type |
FLEX NETWORK Master Unit |
| 32-point input Sink / Source type | FN-X32TS41 | I/O unit of 32-point input sink/source sharing type | |
| 16-point input Sink/Source and 16-point transistor output Sink type |
FN-XY16SK41 | Input/output combination I/O unit of 16-point input sink/source and 16-point transistor output Sink type |
|
| 2-channel Analog / Digital Conversion Unit |
FN-AD02AH41 | Converts 2-channel analog signals to digital signals | |
| 2-channel Digital/Analog Conversion Unit |
FN-DA02AH41 | Converts 2-channel 12-bit digital signals to analog signals and outputs the result |
|
| Communication Cable (50m) | FN-CABLE2050-31-MS | Cables for connecting FLEX NETWORK master unit and FLEX NETWORK units |
|
| Communication Cable（200m） | FN-CABLE2200-31-MS | ||
| FLEX NETWORK Connector * Maintenance Item |
PFXZCHCNFN2 | Connector to attach FLEX NETWORK master unit (5 pcs/set) | |
| 64-point DIO Connector * Maintenance Item |
GLC-DIOCN03 | FN-XY32SK41 Connectors (2 pcs/set) |
*1 You can connect using just one of the available USB interfaces.
*2 For supported models, refer to the Pro-face's support site.
*3 Make sure your screen editing software supports the product.
*4 Purchase this product when installing GP-Pro EX in a second or subsequent PC. One license is required for each PC.
*5 Group License consists of one set of Serial No./Key Code for installation on 10 PCs. (Should be used in the same office. Supports GP-Pro EX Ver. 4.0 or later.)
*6 Includes the settings editor and Runtime.
*7 Purchase this product when installing the settings editor and Run time in subsequent PCs.
*8 Purchase this license when installing only Run time in subsequent PCs. One license is required for each PC.
*9 You can also use a commercial type.
*10 SP5000X Series can save NVRAM (Backup memory) and RTC (Time) without battery. But when you need to keep RTC (Time) more than 100 days without turning on electricity,you need to add the option.
*11 Also R7 Series of M-System Co., Ltd. (FLEX NETWORK remote I/O) can be connected.