ET6000 Options

ET6000 Series Options

Serial Interface

* The cable/adapter requirements vary depending on other devices. Please refer to the Device/PLC connection manual.
Product Name Model No. Description Supported Software
GP-ProEX
RS-232C Isolation Unit CA3-ISO232-01 Connects a host controller to this product and provides isolation
(RS-232C and RS-422 are switchable).

USB (Cables/Adapters)

USB (Type A) Interface

Product Name Model No. Description Supported Software
GP-ProEX
USB Front Cable (1 m) CA5-USBEXT-01 Extension cable that attaches USB interface to the front panel.
USB Clamp Type A (1 port) PFXZCBCLUSA1 Clamp to prevent disconnection of USB cable
(USB Type A, 1 port, 5 clamps/set)


USB (micro-B) interface

Product Name Model No. Description Supported Software
GP-ProEX
USB (micro-B) Front Cable PFXZCIEXMB2 Extension cable that attaches USB interface to the front panel.
USB Clamp Type mini B ZC9USCLMB1 Clamp to prevent disconnection of USB cable (for 1 port, USB Type mini B, 5 pieces/set)

Software

GP-Pro EX

Product Name Model No. Description
GP-Pro EX PFXEXEDV** HMI Screen Editor & Logic Programming Software
GP-Pro EX Editor License*1 PFXEXEDLS** GP-Pro EX editor license
GP-Pro EX Editor Group License*2 PFXEXGRPLS40 GP-Pro EX editor group license (10 licenses)

Others

Product Name Model No. Description Supported Software
GP-ProEX
Screen Protection Sheet
with UV protected
7-inch PFXZCIDS72 Disposable, dirt-resistant sheet for the display
(5 sheets/set)

Maintenance

* Please purchase when the product is damage or lost.
Product Name Model No. Description Supported Software
GP-ProEX
Installation Fastener PFXZCFAF31 Used to install 7-inch, 10-inch and 12-inch Wide model into a solid panel (4 pieces/set).
Installation Gasket PFXZCWG4W1 Provides dust and moisture resistance
when this product is installed into a solid panel (1 piece).
PFXZCWG5W1
DC Power Supply Connector CA5-DCCNM-01 Connector to connect DC power supply cables.
 

*1 Purchase this product when installing GP-Pro EX in a second or subsequent PC. One license is required for each PC.

*2 Group License consists of one set of Serial No./Key Code for installation on 10 PCs. (Should be used in the same office. Supports GP-Pro EX Ver. 4.0 or later.)