Support and Download Materials:
Multi Display Adapter Manual | Multi Display Adapter Installation Guide | Multi Display Adapter Utilities | 3D CAD Drawings | Multi Display Adapter Flyer
Use with these products:
PS5000 Series Displays | Flat Panel Monitors | SP5000 Series Display Modules | Flat Panel Display Selection Guide
Review Display Options:
|Separate installation across long distances with a single LAN cable
Well-adapted to production environments, reliable and easily installed.
Compatible with cloned or extended display mode. Independent monitoring and operation on each panel is possible.
Prevent trouble due to unintended simultaneous operation by multiple users.
* MDA: Multi Display Adapter (Model No. PFXZCDADEXR1)
|Power supply||Rated input voltage||12Vdc (Supplied by the Display Module)|
|Power consumption||8W or less|
|Physical environment||Surrounding air temperature||0 to 60 °C (32 to 140 °F)|
|Surrounding air and storage humidity||10 to 90% RH (non-condensing, wet bulb temperature 39 °C [102.2 °F] or less)|
|Dust||0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)|
|Pollution degree||For use in Pollution Degree 2 environment|
|Corrosive gases||Free of corrosive gases|
|800 to 1,114 hPa (2,000 m [6,561 ft] or lower)|
|Mechanical environment||Vibration resistance||IEC/EN 61131-2 compliant
5 to 9 Hz single amplitude 3.5 mm (0.14 in)
9 to 150 Hz fixed acceleration: 9.8 m/s2
X, Y, Z directions for 10 cycles (approximately 100 minutes)
|Shock resistance||IEC/EN 61131-2 compliant
147 m/s2, X, Y, Z directions for 3 times
|Electrical environment||Noise Immunicty||Noise Voltage: 1,000 Vp-p
Pulse Duration: 1 μs
Rise Time: 1 ns
(via noise simulator)
|Contact discharge method: 6 kV (IEC/EN 61000-4-2 Level 3)|
|Cooling method||Natural air circulation|
|External dimensions (W x H x D)||188 x 131 x 35 mm（7.4 x 5.16 x 1.38 in.）|
|Weight||800 g (1.76 lb) or less|
In order for stable operations of the system using Multi Display Adapter, we recommend the following operations:
When turning on a power:
- Turn on the host terminal and each Multi Display Adapter at the same time (using a common power supply).
- Or, after turning on all Multiple Display Adapters and a standby screen appears, turn on the host terminal.
- Turn on or off Multi Display Adapters and connect or disconnect LAN cables, after turning off the host terminal.