Specifications for PFXSTM6200WAD | Pro-face | Human Machine Interfaces & Industrial PCs

STM6200WAD
PFXSTM6200WAD /
PFXSTM6200WADE
Where to Buy

Documentation

Manual

Support

Technical Support

Quick Information

Datasheet

Design Tools

BLUE
(PFXSTM6200WAD)
GP-Pro EX
(PFXSTM6200WADE)

Certifications

International Standards

Functional Specifications

Application Memory	When using BLUE:FLASH EPROM 128MB Removable System: No When using GP-Pro EX: - Media: FLASH EPROM - Screen Area: 64MB Use the screen area when the user font area's capacity is exceeded - for example, when an image font or a picture font is used. - User Font Area: 8MB - Logic Program Area: 132KB (Equivalent to 15,000 steps) Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1 MB. - Free Space: None Removable System: No
Serial (COM1)	Asynchronous Transmission: RS-232C / 422 / 485, Data Length: 7 or 8 bits, Stop Bit: 1 or 2 bits, Parity: None, Even or Odd, Data Transmission Speed: 2,400 to 115,200 bps, Connector: D-Sub 9 pin (socket)
Ethernet (LAN)	IEEE802.3i / IEEE802.3u, 10BASE-T / 100BASE-TX, Connector: Modular jack (RJ-45) x 2
USB (TYPE-A)	Conforms to USB 2.0 (Type A) x 1 Power supply voltage: 5 Vdc ±5 % Output Current: 500 mA or less Communication distance: 5 m [16.4 ft.] or less
USB (mini-B)	USB 2.0 (micro-B) x 1, Communication Distance: 5 m [16.4 ft]

General Specifications

International Safety Standards
Rated Input Voltage	24 Vdc
Input Voltage Limits	19.2 to 28.8 Vdc
Allowable Voltage Drop	5 ms or less
Power Consumption	(Rear module) Max. 6.8 W (Rear module)When power is not supplied to external devices: 3.5 W or less (Display module) Max. 1.0 W (Display module)When power is not supplied to external devices: 0.6 W or less
In-Rush Current	30 A or less
Voltage Endurance	1,000 Vac, 20 mA for 1 minute (between power terminal and FG terminals)
Insulation Resistance	500 Vdc, 10 MΩ or more (between power terminal and FG terminals)
Surrounding Air Temperature	0 to 50 °C [32 to 122 °F]
Storage Temperature	-20 to +60 °C [-4 to 140 °F]
Ambient Humidity	10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)
Storage Humidity	10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)
Dust	0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution Degree	For use in Pollution Degree 2 environment
Atmosphere	800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)
Vibration Resistance	IEC/EN 61131-2 compliant 5 to 9 Hz single amplitude 3.5 mm [0.14 in.] 9 to 150 Hz fixed acceleration: 9.8 m/s2 X, Y, Z directions for 10 cycles (approx. 100 min.)
Concussion Resistance	IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times
Electrostatic Discharge Immunity	Contact Discharge Method: 6 kV Air Discharge Method: 8 kV (IEC/EN61000-4-2 Level 3)
Grounding	Functional grounding: Grounding resistance of 100 Ω, 2mm2 (AWG 14) or thicker wire, or your country's applicable standard. (Same for FG and SG terminals)
Structure	Rear Module: IP20 Display Module: IP65F, UL 50/50E, Type 1, Type 4X (indoor use only), Type 12, Type 13
Cooling Method	Natural air circulation
Weight Approx.	Rear Module: 0.27 kg (0.6 lb) or less Display Module:0.22 kg (0.49 lb) or less
External Dimensions	Rear Module: W145.6 x H108.23 xD 41.4 mm [W5.73 x H4.26 x D1.63 in] (excluding protrusions) Display Module: W140.4 x H101.1 x D13.9 mm [W5.53 x H3.98 x D0.55 in] (excluding protrusions)
Panel Cut Dimensions	Diameter 22.5 mm (0.88 in)