Manual | Technical Resources | PFXSP5660TPD Datasheet | PFXSP5B40 Datasheet | Software | Certifications | SP5000 Flyer
Display Specifications
| Display Type | TFT Color LCD | |
|---|---|---|
| Display Size | 12.1” | |
| Resolution | 1,024 x 768 pixels (XGA) | |
| Auto Scaling | Yes | |
| Effective Display Area | W245.76 x H184.32 mm (W9.68 x H7.26 in.) |
|
| Display Colors | 16 million colors For details about Display Colors, refer to the manual for your screen editing software. |
|
| Backlight | White LED (Not user replaceable. When replacement is required, contact your local distributor.) |
|
| Backlight Service Life | 50,000 hours or more (continuos operation at 25 °C [77 °F] before backlight brightness decreases to 50% |
|
| Brightness Control | 0 to 100 (Adjusted with touch panel or software) | |
| Brightness Sensor | Yes | |
| Touch Panel |
Type | Resistive Film (analog, multi-touch) |
| Resolution | 1,024 x 1,024 | |
| Service Life | 1 million times or more | |
Electrical Specifications
| Power Supply |
Rated Input Voltage | 12 to 24 Vdc |
|---|---|---|
| Input Voltage Limits | 10.8 to 28.8 Vdc | |
| Voltage Drop | 12 Vdc: 1.25 ms or less 24 Vdc: 5 ms or less |
|
| Power Consumption (Primary Power Supply [including power loss]) |
Max. 58 W | |
| In-Rush Current | 30 A or less | |
| Voltage Endurance | 1,000 Vac, 20 mA for 1 minute (between charging and FG terminals) | |
| Insulation Resistance | 500 Vdc, 10 MΩ or more (between charging and FG terminals) | |
Environmental Specifications
| International Safety Standard |
 |
|
|---|---|---|
| Physical Environmen |
Surrounding Air Temperature |
0 to 60 °C (32 to 140 °F) |
| Storage Temperature | -20 to 60 °C (-4 to 140 °F) | |
| Surrounding Air and Storage Humidity |
10% to 90% RH (Non condensing, wet bulb temperature 39 °C [102.2 °F] or less) |
|
| Dust | 0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels) | |
| Pollution Degree | For use in Pollution Degree 2 environment | |
| Corrosive Gases | Free of corrosive gases | |
| Atmospheric Pressure (Operating Altitude) |
800 to 1,114 hPa (2,000 m [6,561 ft] or lower) | |
| Mechanical Environment |
Vibration Resistance |
IEC/EN 61131-2 compliant 5 to 9 Hz Single amplitude 3.5 mm (0.14 in.) 9 to 150 Hz Fixed acceleration: 9.8 m/s2 X, Y, Z directions for 10 cycles (approx. 100 min.) |
| Shock Resistance | IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times |
|
| Electrical Environment |
Noise Immunity | Noise Voltage: 1,000 Vp-p Pulse Duration: 1 μs Rise Time: 1 ns (via noise simulator) |
| Electrostatic Discharge Immunity |
Contact Discharge Method: 6 kV (IEC/EN 61000-4-2 Level 3) | |
Memory
| Application Memory | Screen Size: 64MB *CFast card |
|---|---|
| Free Space: About 5GB *2 | |
| Backup Memory | NVRAM 320 KB |
Interface Specifications (Display)
| USB (Type A) *3 |
Connector | USB 2.0 (Type A) x 1 |
|---|---|---|
| Power Supply Voltage |
5 Vdc ±5% | |
| Maximum Current Supplied |
500 mA | |
| Maximum Transmission Distance |
5 m (16.4 ft) | |
| USB (mini-B) *3 |
Connector | USB 2.0 (mini-B) x 1 |
| Maximum Transmission Distance |
5 m (16.4 ft) | |
| Wireless LAN *4 | Standards | IEEE802.11b/IEEE802.11g/IEEE802.11n |
| Frequency Bandwidth | 2.4 GHz | |
| Channel Bandwidth | 20 MHz | |
| Channel | Access Point mode *5: 1 to 11 ch Client mode *6: North America US: 1 to 11 ch Japan JP: 1 to 13 ch Europe EU: 1 to 13 ch Korea KR: 1 to 13 ch China CN: 1 to 13 ch Taiwan TW: 1 to 11 ch |
|
| Transmission Speed | IEEE802.11b: max 11 Mbps IEEE802.11g: max 54 Mbps IEEE802.11n: max 72.2 Mbps |
|
| Transmission Distance | Up to 30 m (distance varies depending on application software and surrounding environment) | |
| Action Mode | Client mode/Access Point mode | |
| Communication Mode | Infrastructure | |
| Network Authentication | Open, WPA-Personal, WPA2-Personal | |
| Data Encryption | WEP (128 bit) (Open) *7 AUTO/TKIP (WPA-Personal) AES (WPA2-Personal) |
|
| Maximum Client Connections | 10 | |
| Connection Angle and Distance | Only the display side is connectable. The enabled connectivity angle and distance depend on your operating environment, applications to be used, and a communication target device. Check operation before use. |
Interface Specifications (Box Module)
| Serial Interface COM1 |
Asynchronous Transmission |
RS-232C/422/485 |
|---|---|---|
| Data Length | 7 or 8 bits | |
| Stop Bit | 1 or 2 bits | |
| Parity | None, odd, or even | |
| Data Transmission Speed |
2,400(1,200) to 115,200 bps | |
| Connector | D-Sub 9 pin (plug) | |
| Serial Interface COM2 |
Asynchronous Transmission |
RS-232C/422/485 |
| Data Length | 7 or 8 bits | |
| Stop Bit | 1 or 2 bits | |
| Parity | None, odd, or even | |
| Data Transmission Speed |
2,400(1,200) to 115,200 bps | |
| Connector | D-Sub 9 pin (plug) | |
| USB (Type A) Interface |
Connector | USB 2.0 (Type A) x 3 |
| Power Supply Voltage |
5 Vdc ±5% | |
| Maximum Current Supplied |
500 mA/port, 1 A total for 3 ports |
|
| Maximum Transmission Distance |
5 m (16.4 ft) | |
| USB (mini-B) Interface |
Connector | USB 2.0 (mini-B) x 1 |
| Maximum Transmission Distance |
5 m (16.4 ft) | |
| Ethernet Interface |
Standard | IEEE802.3i/IEEE802.3u/IEEE802.3ab, 10BASE-T/100BASE-TX/1000BASE-T |
| Connector | Modular jack (RJ-45) x 2 | |
| SD Card Interface |
SD Card | SD Card Slot (Storage) x 1 |
| CFast Card Interface |
CFast Card | CFast Card Slot (System) x 1 CFast Card Slot (Storage) x 1 |
| Expansion Unit Interface |
Expansion Unit | Fieldbus Unit x 1 |
| Video Interface |
DVI-D | DVI-D OUT |
| Connector | DVI-D 24 pin (socket) x 1 | |
| Sound Input Interface |
Sound Input | MIC or LINE input (software switch) |
| Connector | MINI-JACK ∅3.5 x 1 | |
| Sound Output Interface |
Speaker Output | 300 mW (Rated Load: 8 Ω, Frequency: 1 kHz) |
| LINE Output | Rated load: 10 kΩ or more | |
| Connector | 2-piece terminal block (AUX) x 1 | |
| AUX Output Interface |
AUX Output | Alarm Output/Buzzer Output |
| Rated Voltage | 24 Vdc | |
| Rated Current | 50 mA or less | |
| Connector | 2-piece terminal block (AUX) x 1 |
Structural Specifications
| Grounding | Functional grounding: Grounding resistance of 100 Ω, 2 mm2 (AWG 14) or thicker wire, or your country’s applicable standard (same for FG and SG terminals). |
|---|---|
| Cooling Method | Natural air circulation |
| Structure *8 | When using a factory-installed front USB cover: IP65F, IP67F. When using a front USB cover as an option: IP66F, IP67F, Type 4X (Indoor Use Only)/13 * The front face of this product when properly installed in an enclosure and not using the front panel USB port. NOTE: The option is a front USB cover with screw manufactured by Pro-face (Model Number PFXZCDCVUS1). |
| External Dimensions | W315 x H241 x D67 mm (W12.4 x H9.49 x D2.64 in.) |
| Panel Cut Dimensions | W301.5 x H227.5 mm (W11.87 x H8.96 in.) *9 Panel thickness area: 1.6 to 5 mm (0.06 to 0.2 in.) *10 |
| Weight *11 | 4.1 kg (9.08 lb) or less |
External Dimensions
Display module and box module combination
 |
Panel Cut-out Dimensions
| Model Name | A | B | C |
|---|---|---|---|
| SP-5660TP | 301.5 (+1/-0) [11.87 (+0.04/-0)] |
227.5 (+1/-0) [8.96 (+0.04/-0)] |
1.6 to 5 [0.06 to 0.2] |
External Dimensions with cables
(Image of Open Box)
| *1 Rotation area of the fastener *2 Pitch of center of installation fastener screws |