|
|
|
|
|
|
|
||
---|---|---|---|---|---|---|---|---|
Serial Interface Cable | 5m | FP61V-IS00-O | ||||||
USB Cable *1 | 5m | FP-US00 | ||||||
USB Front Cable | CA5-USBEXT-01 | - | - | |||||
Analog RGB Cable | 4.5m | FP-CV02-45 | ||||||
DVI-D/RGB Branch Cable | 5m | CA7-CBLCVRGB-01 | ||||||
DVI-D Cable | 5m | FP-DV01-50 | *13 | *2 | *2 | *2 | *2 | |
10m | FP-DV01-100 | *3 |
*3 | *3 | - | - | ||
DVI 10m cable for PS4000 series *4 | 10m | PFXZPBCBDV101 | *13 | *2 | *2 | *2 | *2 | |
Unit Cover (15-inch screen) | CA4-CVR15-01 | - | - | - | - | |||
Desktop Stand *5 | CA1-STDLRG-01 | - | - | |||||
Screen Protection Sheet (5 Sheets/ Set) |
10.4/ 12.1-inch screen | PSL-DF00 | - | - | ||||
15-inch screen | CA3-DFS15-01 | - | - | - | - | |||
19-inch screen | CA7-DFS19-01 | - | - | - | - | |||
Backlight | 10.4-inch screen 2/ set (For 1 unit) |
GP577RT-BL00-MS | - | - | - | - | ||
10.4-inch screen (SVGA) 1/ set (For 1 unit) |
CA3-BLU12-01 | - | - | - | *6 | - | ||
12.1-inch screen (XGA) 1/ set (For 1 unit) |
CA5-BLU12XGA-01 | - | - | - | - | |||
15-inch screen 2/ set (For 1 unit) |
CA3-BLU15-01 | - | *7 | - | - | - | ||
Installation Gasket | GP570-WP10-MS | - | - | |||||
CA3-WPG15-01 | - | - | - | - | ||||
CA7-WPG19-01 | - | - | - | - | ||||
Installation Fasteners *9 | GP070-AT01 | - | - | |||||
CA3-ATFALL-01 | - | - | - | |||||
AC Power Supply Connector | CA7-ACCNL-01 | - | - | - | ||||
DC Power Supply Connector | CA7-DCCNL-01 | - | *10 | - | - | - | ||
CA5-DCCNL-01 | - | - | - | *11 | *12 |
*1 Compatible only with WindowsR 2000 and WindowsR XP.
*2 PS4000 Series can be connected with only FP3000 units with revision "B" or later.
When connecting PC/AT compatible and FP units with revision "1", FP unit's DVI-D interface might not be connectable. In that case, use FP unit's analog RGB interface. We will recommend the resolution of PS4000 Series, PL-3000B, PS2000B and PC/AT compatible to change to the maximum display resolution of FP additionally.
*3 Available only when connected using PL-3000B (Revision "B" or more) and PS2000B. (You need to change the settings on the PL-3000B and PS2000B side.) We recommend the resolution of PL-3000B and PS2000B to change to the maximum display resolution of the FP. Although the maximum cable length for DVI standard is 5m, in the case of connecting PL-3000B with the cable, the PL unit and cable operate even if it is 10m long.
*4 The maximum cable length for DVI standard is 5m. Because the 10m cable is non-standard, the exact performances is not guaranteed. According to environment or equipment configuration, video images may not be displayed properly, so be sure to check performances every time environment or equipment configuration is changed. A 5m cable is recommended when using in SXGA resolution or higher.
*5 Required
*6 It is available for FP3600-T11(-M), FP3600-T42-24V with the revision 4 or earlier.
*7 For FP3710-T41-U, FP3710-T41.
*8 It is available for FP3710-T42-U, FP3710-T42 with the revision 4 or earlier.
*9 Included in the product package.
*10 Only for FP3710-T42-24V-U
*11 Only for FP3600-T41-24V
*12 Only for FP3500-T41-24V
*13 PL3000 Series and non hot-pluggable PC/AT compatible can be connected.